Join us on one of our free, CPD Certified Webinars

Upcoming events

    • 28-06-2018
    • 11:00 - 12:00 (UTC+01:00)
    • Online
    Register


    Overview

    This Webinar focuses on the use of Thermal imagers to detect electrical energy loss. The content focuses on finding faults in electrical equipment like cables, connections, fuses, breakers, transformers, motors, etc. which can be associated with abnormal electrical energy losses.


    Learning Objectives

    During this webcast we will try to give you a good introduction to the possibilities of using thermal imagers to find  faults in loaded electrical equipment without disturbing production. This is not meant as a full training. 


    This webinar is suitable for

    Electricians, Electrical Contractors, Electrical Engineers, Plant Maintenance Facility Managers, Energy Managers.


    Duration

    45 minutes webinar, plus 15 minute Q & A session.


    Prior knowledge level

    Entry/beginner - intermediate


    • 28-06-2018
    • 13:00 - 14:00 (UTC+01:00)
    • Online
    Register



    Overview

    This webinar will look at what power quality is and how it looks like in real situations. Included is a brief overview of some regulations and norms attached to that quality. The webinar focuses on measurement of the relevant parameters, what needs to be measured, with which type of instrument and for how long.

    The most important step then is correlation the measurements taken to the manifestations and phenomena of power quality. 


    Learning Objectives

    Understanding of the implications of poor power quality. How to measure and identify power quality parameters effectively.


    This webinar is suitable for

    Electrical Engineers, Plant Maintenance Facility Managers, Energy Managers.


    Duration

    45 minutes webinar, plus 15 minute Q & A session.


    Prior knowledge level

    Entry/beginner - intermediate



    • 27-09-2018
    • 11:00 - 12:00 (UTC+01:00)
    • Online
    Register



    Overview

    This webinar will look at what power quality is and how it looks like in real situations. Included is a brief overview of some regulations and norms attached to that quality. The webinar focuses on measurement of the relevant parameters, what needs to be measured, with which type of instrument and for how long.

    The most important step then is correlation the measurements taken to the manifestations and phenomena of power quality. 


    Learning Objectives

    Understanding of the implications of poor power quality. How to measure and identify power quality parameters effectively.


    This webinar is suitable for

    Electrical Engineers, Plant Maintenance Facility Managers, Energy Managers.


    Duration

    45 minutes webinar, plus 15 minute Q & A session.


    Prior knowledge level

    Entry/beginner - intermediate



    • 27-09-2018
    • 13:00 - 14:00 (UTC+01:00)
    • Online
    Register


    Overview

    This Webinar focuses on the use of Thermal imagers to detect electrical energy loss. The content focuses on finding faults in electrical equipment like cables, connections, fuses, breakers, transformers, motors, etc. which can be associated with abnormal electrical energy losses.


    Learning Objectives

    During this webcast we will try to give you a good introduction to the possibilities of using thermal imagers to find  faults in loaded electrical equipment without disturbing production. This is not meant as a full training. 


    This webinar is suitable for

    Electricians, Electrical Contractors, Electrical Engineers, Plant Maintenance Facility Managers, Energy Managers.


    Duration

    45 minutes webinar, plus 15 minute Q & A session.


    Prior knowledge level

    Entry/beginner - intermediate


    • 25-10-2018
    • 11:00 - 12:00 (UTC+01:00)
    • Online
    Register


    Overview

    This Webinar focuses on the use of Thermal imagers to detect electrical energy loss. The content focuses on finding faults in electrical equipment like cables, connections, fuses, breakers, transformers, motors, etc. which can be associated with abnormal electrical energy losses.


    Learning Objectives

    During this webcast we will try to give you a good introduction to the possibilities of using thermal imagers to find  faults in loaded electrical equipment without disturbing production. This is not meant as a full training. 


    This webinar is suitable for

    Electricians, Electrical Contractors, Electrical Engineers, Plant Maintenance Facility Managers, Energy Managers.


    Duration

    45 minutes webinar, plus 15 minute Q & A session.


    Prior knowledge level

    Entry/beginner - intermediate


    • 25-10-2018
    • 13:00 - 14:00 (UTC+01:00)
    • Online
    Register



    Overview

    This webinar will look at what power quality is and how it looks like in real situations. Included is a brief overview of some regulations and norms attached to that quality. The webinar focuses on measurement of the relevant parameters, what needs to be measured, with which type of instrument and for how long.

    The most important step then is correlation the measurements taken to the manifestations and phenomena of power quality. 


    Learning Objectives

    Understanding of the implications of poor power quality. How to measure and identify power quality parameters effectively.


    This webinar is suitable for

    Electrical Engineers, Plant Maintenance Facility Managers, Energy Managers.


    Duration

    45 minutes webinar, plus 15 minute Q & A session.


    Prior knowledge level

    Entry/beginner - intermediate



    • 29-11-2018
    • 11:00 - 12:00 (UTC-00:00)
    • Online
    Register



    Overview

    This webinar will look at what power quality is and how it looks like in real situations. Included is a brief overview of some regulations and norms attached to that quality. The webinar focuses on measurement of the relevant parameters, what needs to be measured, with which type of instrument and for how long.

    The most important step then is correlation the measurements taken to the manifestations and phenomena of power quality. 


    Learning Objectives

    Understanding of the implications of poor power quality. How to measure and identify power quality parameters effectively.


    This webinar is suitable for

    Electrical Engineers, Plant Maintenance Facility Managers, Energy Managers.


    Duration

    45 minutes webinar, plus 15 minute Q & A session.


    Prior knowledge level

    Entry/beginner - intermediate



    • 29-11-2018
    • 13:00 - 14:00 (UTC-00:00)
    • Online
    Register


    Overview

    This Webinar focuses on the use of Thermal imagers to detect electrical energy loss. The content focuses on finding faults in electrical equipment like cables, connections, fuses, breakers, transformers, motors, etc. which can be associated with abnormal electrical energy losses.


    Learning Objectives

    During this webcast we will try to give you a good introduction to the possibilities of using thermal imagers to find  faults in loaded electrical equipment without disturbing production. This is not meant as a full training. 


    This webinar is suitable for

    Electricians, Electrical Contractors, Electrical Engineers, Plant Maintenance Facility Managers, Energy Managers.


    Duration

    45 minutes webinar, plus 15 minute Q & A session.


    Prior knowledge level

    Entry/beginner - intermediate


Past events

24-05-2018 Detecting Electrical Energy Loss Using Thermal Imaging
24-05-2018 Power Quality – The Good The Bad and How to Measure
04-05-2018 Power Quality – The Good The Bad and How to Measure
04-05-2018 Detecting Electrical Energy Loss Using Thermal Imaging
29-03-2018 Detecting Electrical Energy Loss Using Thermal Imaging
29-03-2018 Power Quality – The Good The Bad and How to Measure
22-02-2018 Power Quality – The Good The Bad and How to Measure
22-02-2018 Detecting Electrical Energy Loss Using Thermal Imaging
01-11-2017 Voltimum: Power Quality – The Good The Bad and How to Measure
26-10-2017 Power Quality – The Good The Bad and How to Measure
26-10-2017 Detecting Electrical Energy Loss Using Thermal Imaging
21-09-2017 Detecting Electrical Energy Loss Using Thermal Imaging
21-09-2017 Power Quality – The Good The Bad and How to Measure
13-09-2017 Voltimum: Energy Saving – A Practical Approach to Energy Efficiency
30-06-2017 Detecting Electrical Energy Loss Using Thermal Imaging
29-06-2017 Power Quality – The Good The Bad and How to Measure
29-06-2017 Energy Saving – A Practical Approach to Energy Efficiency
26-05-2017 Power Quality – The Good The Bad and How to Measure
25-05-2017 Energy Saving – A Practical Approach to Energy Efficiency
25-05-2017 Detecting Electrical Energy Loss Using Thermal Imaging
24-05-2017 Voltimum: Detecting Electrical Energy Loss Using Thermal Imaging
21-04-2017 Power Quality – The Good The Bad and How to Measure
21-04-2017 Energy Saving – A Practical Approach to Energy Efficiency
20-04-2017 Detecting Electrical Energy Loss Using Thermal Imaging
31-03-2017 Energy Saving – A Practical Approach to Energy Efficiency
31-03-2017 Power Quality – The Good The Bad and How to Measure
30-03-2017 Detecting Electrical Energy Loss Using Thermal Imaging

For questions or support please email us at: fluke.academy@Fluke.com

For questions or support in GERMANY email us at : seminare@fluke.com

Privacy Statement

Integrity and Compliance at FORTIVE

Powered by Wild Apricot Membership Software